Other tools

Last updated on 2026-10-28 | Edit this page

Estimated time: 45 minutes

This episode is optional. Keep HyperQueue, Snakemake, and FireWorks. FireWorks is part of the comparison.

Overview

Questions

  • Where does each tool say that the aggregation waits for every average?
  • What is measurements/sacct.txt for, and what does it leave out?

Objectives

  • Run the average and profile exercises with HyperQueue, Snakemake, and FireWorks.
  • Read the HyperQueue --wait, the Snakemake aggregate input, and the FireWorks parents.
  • Use 16 tasks for HyperQueue and Snakemake, and one worker for the file-backed FireWorks example.
  • Read the 25 October 2026 table as one run, and use sacct.txt for the Slurm accounting of that run.

The same two exercises

episodes/files/hands-on/alternatives/ repeats example 4 and example 5.

  • Example 4: one average per CSV, then an aggregation that must wait for every average.
  • Example 5: sleeps of different lengths, so idle time can be computed from each task’s start and end.

HyperQueue and Snakemake request 16 tasks. The file-backed FireWorks example requests one task, for its one worker. The average scripts default to 100 files. QCG_MAX_INPUTS=0 selects every file. Run each tool from its own directory. Two tools writing one result.csv in one directory will collide.

On 2 cores the README scales HyperQueue and Snakemake, and leaves FireWorks at one task:

BASH 

QCG_MAX_INPUTS=100 sbatch --ntasks=2 average.sh
TIMES_FILE=../../example_05/times_short.txt sbatch --ntasks=2 profile.sh

FireWorks keeps --ntasks=1. For the short profile: TIMES_FILE=../../example_05/times_short.txt sbatch profile.sh.

The load line for each tool is the tab. The scripts also name a version.

BASH 

module load 2025
module load HyperQueue/0.24.0

BASH 

module load 2025
module load Snakemake

BASH 

module load 2025
module load FireWorks

If module spider FireWorks finds nothing, use a virtual environment in your home directory.

On a two-core node, pass the smaller request on the command line. Do not edit the script.

BASH 

sbatch --cpus-per-task=2 pi.sh
sbatch --array=0-99%10 array_job.sh
QCG_MAX_INPUTS=100 sbatch --ntasks=2 qcg_job.sh
iend=8 wdir=TMPDIR sbatch run.sh

Check the core count with sinfo first.

HyperQueue

A server and one worker run inside the allocation. The average script lists the CSV paths in files.txt and submits one task per line.

The dependency is hq submit --wait. The flag returns when every task has finished. The aggregation is the next line. From alternatives/hyperqueue/average.sh:

BASH 

hq submit --each-line files.txt --cpus=1 --wait \
    --stdout "$averages/%{TASK_ID}.csv" --stderr "$averages/%{TASK_ID}.err" \
    -- bash -c 'python3 ../../example_04/average.py "$HQ_ENTRY"'

python3 ../aggregate.py "$averages"/*.csv > result.csv

The script loads module load 2025, Python/3.13.1-GCCcore-14.2.0, and HyperQueue/0.24.0. The alternatives README says module spider HyperQueue in the Snellius 2025 stack lists 0.19.0, 0.20.0, and 0.24.0, checked on 2026-10-25. The header asks for --ntasks=16.

profile.sh uses the same --each-line and --wait pattern on the times file, and prints START and END around that submit.

Snakemake

snakemake --cores "$SLURM_NTASKS" runs the rules on the cores of the allocation. The average script’s header also asks for --ntasks=16.

The dependency is the input of the aggregate rule in alternatives/snakemake/Snakefile:

PYTHON 

rule aggregate:
    input:
        expand("averages/{name}.csv", name=NAMES),
    output:
        "result.csv",
    shell:
        "cat {input:q} | sort > {output:q}"

Snakemake starts that rule when every file in the input list exists. Snakefile.profile has one sleep rule instance per line of the times file.

The alternatives README gives the module as snakemake/9.22.0-foss-2025b. It also says module spider snakemake finds nothing in the Snellius 2025 stack, and the script then activates $HOME/venvs/snakemake. The install line in that README is pip install snakemake after module load 2025 and Python/3.13.1-GCCcore-14.2.0.

FireWorks

FireWorks stores the workflow in a LaunchPad. Here the LaunchPad is a file under $TMPDIR (MONGOMOCK_SERVERSTORE_FILE). There is no MongoDB server. rlaunch rapidfire starts one worker, which runs each Firework that is ready until none remain.

A file LaunchPad allows one writer. The comment in average.sh says several rlaunch workers lose Firework states. The aggregate then never runs. Parallel workers need a MongoDB server. The header is one node and one task:

BASH 

#SBATCH --nodes=1
#SBATCH --ntasks=1
#SBATCH --time=00:20:00
#SBATCH --partition=rome

profile.sh uses the same --ntasks=1. The tasks run one after another, because there is one worker.

The dependency is parents=averages on the aggregate Firework in alternatives/fireworks/workflow.py:

PYTHON 

command = shlex.join([sys.executable, os.path.join(HERE, "..", "aggregate.py"),
                      "--manifest", manifest])
aggregate = Firework(ScriptTask.from_str(f"{command} > {shlex.quote(os.path.join(HERE, 'result.csv'))}"),
                     name="aggregate", parents=averages)
lp.add_wf(Workflow(averages + [aggregate], name="average"))

parents=averages is the link. FireWorks runs that Firework after every average Firework has finished. The workflow writes selected.json and calls aggregate.py --manifest. HyperQueue still calls aggregate.py with the output paths as arguments.

The module line in the script is FireWorks/2.1.4-gfbf-2025a. The README says the Snellius 2025 stack has no FireWorks module, and the fallback is $HOME/venvs/fireworks with pip install "fireworks[mongomock]".

On Snellius the one worker took 9 s for 100 files and 212 s for all 1000 files, on its one core. Snakemake took 15 s for the 1000 files on 16 cores, about 240 core-seconds. Per core those costs are close. The file LaunchPad still allows one worker, so FireWorks in this example cannot take more cores.

average.sh uses 100 of the 1000 files unless QCG_MAX_INPUTS says otherwise.

One measured run

The slides and alternatives/README.md report one run on 25 October 2026: two-core nodes, each job alone, --nodes=1 --ntasks=2 (FireWorks --ntasks=1), the 32 tasks of times_short.txt at their original lengths, 338 task-seconds in all. The slide says this is one run, and it is not a general result. A 16-core Snellius allocation was not measured for this table.

Idle is 1 - busy / (slots * span). Span is END - START. Busy is the sum of the task durations. The lanes in plot_profile.py are the CPU number a task reported when it started. Tasks are not pinned, so overlapping bars can leave white space in a lane. That white space is not the idle figure. The idle figure comes from the start and end times.

Tool Span Idle Where it sits
bash pipeline 267 s 37% each block of 2 tasks waits for its longer task
QCG-PilotJob 181 s 7% 1 s before the first task, 3 s after the last, short gaps
HyperQueue 172 s 2% 1 s of start-up, 0.1 s between tasks
Snakemake 250 s 32% 77 s of start-up before the first task; the tasks themselves spanned 171 s with 0.1 s gaps
FireWorks 344 s 2% of its one slot one worker, so the tasks run one after another

An earlier QCG run that loaded a module inside every task showed 23% idle. The examples pass no modules=, so a task inherits the job’s environment and does not pay for a module load.

Averages of 100 files, same nodes:

Tool Time
HyperQueue 11 s
QCG-PilotJob, qcg_job_v4.py 18 s
FireWorks, one worker 25 s
Snakemake 67 s

QCG’s 7% is a second at the start and three at the end, plus short gaps. HyperQueue’s 2% is the next task starting when a slot frees. Snakemake’s gaps between tasks are the same 0.1 s. The 32% is the 77 s before the first task. FireWorks at 344 s is the one worker, task after task.

The bash pipeline’s 37% is the block of 2: the block waits for its longer task. That is the same wait as in pipeline.sh.

What sacct.txt is for

episodes/files/hands-on/alternatives/measurements/sacct.txt is the Slurm listing of that run. measurements/README.md says measure.sh submitted the nine jobs and sacct.txt lists them. The format in measure.sh is:

BASH 

sacct -X -n -j "$ids" -o JobID,JobName%20,NodeList,AllocCPUS,Elapsed,State,ExitCode

The file has those nine lines:

18158                 pipeline.sh     coursenode1          2   00:04:35  COMPLETED      0:0
18159                  qcg_job.sh     coursenode2          2   00:03:13  COMPLETED      0:0
18160                  profile.sh     coursenode3          2   00:03:04  COMPLETED      0:0
18161                  average.sh     coursenode3          2   00:00:11  COMPLETED      0:0
18162                  profile.sh     coursenode2          2   00:04:31  COMPLETED      0:0
18163                  average.sh     coursenode3          2   00:01:07  COMPLETED      0:0
18164                  profile.sh     coursenode3          1   00:05:57  COMPLETED      0:0
18165                  average.sh     coursenode3          1   00:00:25  COMPLETED      0:0
18166                  qcg_job.sh     coursenode1          2   00:00:18  COMPLETED      0:0

The output files next to it name the tool: pipeline.18158.out, qcg.18159.out, hq.18160.out, hq-average.18161.out, snakemake.18162.out, snakemake-average.18163.out, fw.18164.out, fw-average.18165.out, and slurm-18166.out for QCG-PilotJob v4 averages.

Elapsed is the scheduler column. The span in the idle table is END - START inside the job output. On the average jobs the two agree with the table (11 s, 67 s, 25 s, 18 s). On the profile jobs they differ. Job 18158’s Elapsed is 00:04:35 and the pipeline span is 267 s. Use Elapsed when you want the accounting, and the span when you want the idle formula.

sacct.txt has no CPUTimeRAW column. The 2.0 SBU figure in example 4 is job 16235860, not one of these nine. Core-hours for a new run use the example 4 format, CPUTimeRAW / 3600.

How the deck chooses

  • QCG-PilotJob and HyperQueue: many tasks inside one allocation. QCG-PilotJob is driven from Python. HyperQueue is driven from the command line, and it has a Python API as well.
  • Snakemake: rules on files. A rerun builds what changed.
  • FireWorks: a database of workflows, with states and reruns. Without a MongoDB server the file LaunchPad allows one worker.
Challenge

Where the dependency is written

For the average exercise, name the line or field that makes the aggregation wait, in HyperQueue, in Snakemake, and in FireWorks.

HyperQueue: hq submit --each-line files.txt --cpus=1 --wait in hyperqueue/average.sh. The aggregate line is the python3 ../aggregate.py command after that submit returns.

Snakemake: the input of rule aggregate in Snakefile, expand("averages/{name}.csv", name=NAMES).

FireWorks: parents=averages on the aggregate Firework in fireworks/workflow.py, in the lp.add_wf(Workflow(averages + [aggregate], name="average")) call.

QCG’s first form of the same idea is after=job_names in qcg_job_v1.py.

Challenge

Scale the optional run

You are on a 2-core node and you want the short profile from all three tools. What does FireWorks keep that the other two override? Which file lists the nine measured jobs?

On a two-core node, pass the smaller request on the command line. Do not edit the script.

BASH 

sbatch --cpus-per-task=2 pi.sh
sbatch --array=0-99%10 array_job.sh
QCG_MAX_INPUTS=100 sbatch --ntasks=2 qcg_job.sh
iend=8 wdir=TMPDIR sbatch run.sh

Check the core count with sinfo first.

BASH 

module load 2025
module load HyperQueue/0.24.0

BASH 

module load 2025
module load Snakemake

BASH 

module load 2025
module load FireWorks

If module spider FireWorks finds nothing, use a virtual environment in your home directory.

HyperQueue and Snakemake take --ntasks=2 on the command line. Their scripts still say --ntasks=16. FireWorks keeps --ntasks=1, because the file LaunchPad has one worker.

BASH 

TIMES_FILE=../../example_05/times_short.txt sbatch --ntasks=2 profile.sh
TIMES_FILE=../../example_05/times_short.txt sbatch profile.sh

The second line is the FireWorks directory. The first is HyperQueue or Snakemake, from that tool’s directory.

episodes/files/hands-on/alternatives/measurements/sacct.txt lists the nine jobs from 25 October 2026: job id, name, node, allocated CPUs, Elapsed, state, and exit code. The idle percentages are computed from START, END, and TASK lines, not from the Elapsed column.

Key Points
  • HyperQueue waits with hq submit --wait. The aggregate command is the next line.
  • Snakemake waits because the aggregate rule’s input lists every average file.
  • FireWorks waits with parents=averages. The file LaunchPad has one worker and the script asks for one task.
  • HyperQueue and Snakemake scripts request 16 tasks. On 2 cores, override with --ntasks=2.
  • The 25 October 2026 table is one run: pipeline 267 s and 37% idle, QCG 181 s and 7%, HyperQueue 172 s and 2%, Snakemake 250 s and 32%, FireWorks 344 s and 2% of one slot.
  • measurements/sacct.txt is the Slurm accounting for that run. It has Elapsed, and it has no CPUTimeRAW.